- The tertiary absorption of lye, distilled water and gas ensures the reliability of the excluded gas
- Due to the large contact surface between gas and liquid, the neutralization efficiency is high and the exhaust gas is pollution-free.
-
-
- Sample Holes: 12 & 20
- Designed temperature: RT-200℃
- Temperature control table: Liquid crystal display/±1℃
- Heating module material: Aluminium alloy
- Timing range: 0—99 hours
-
- Welded by stainless steel plate
- Collection port:8, 10, 15, 20
- Extraction opening: 1, 2
-
- Apply to plastic and glass pipettes from 0.1 -100mL
- 3μm replaceable hydrophobic filter
-
- Apply in ink printing, in Film Processing, Textile Printing and Dyeing, Plastic Electronics and Other Industries
- Wavelength Range: 400~700nm
- Wavelength Pitch: 10nm
- Combined LED Light Sources
-
- PVC tubing with outside diameter 3-7mm, thickness not more than 0.85mm
- Automatic control of sealing time
- No need of scissors to cut the tubing
-
- Digital control, up to 300℃
- Bead Capacity: 300g
- Heating Time: 25min(RT. to 300°C)
- Temp accuracy: 土5℃
-
- Heating steps: 9 steps
- Temperature range (nominal Temperature): 20℃~3000℃
- Slope heating time: 0~999s
- Heating holding time: 1s~999s (the sum of both time should be less than 999 seconds)
- Inert gas needed: argon, pressure of entry larger than 0.3Mpa
- Cooling water: tap water or cycling water, flow rate no less than 2L/min
-
- Resolution: 0.001,0.01,0.1,1
- Accuracy: ±1% F.S
- Calibration Points: 2 to 5 points (0.01, 0.1, 1, 10, 100mmol/L)
-
- 2 to 5 points calibration
- For water hardness and temperature
- Stores or recalls up to 500 data sets
- 5 kinds of water hardness units
-
- lon Range: 0.001-30000
- Accuracy: ±0.5% F.S. (monovalent), ±1% F.S. (divalent)
- mV Range: ±2000.0mV
-
- 1 to 3 points calibration,
- Selectable TDS conversion factor
- Setup menu contains 5 options
- Accuracy: 1% F.S.
Get Social