- Capacity: 2.5L
- Material: Polypropylene
- Withstand high temp. of no more than 100 °C
-
-
- Measuring Range (mPa·s) : 5～80,000,000
- Rotating Speed (RPM): 0.1～200(Stepless Gear), 5～100
- Temperature control range: 10℃ above ambient～300℃
- Number of spindle: 4
- Sample capacity: 10-20ml
-
- Capacity: 1.35L-10L
- Material: PMMA
- Can withstand temp. of 50° C
- Fixed & locked by fixture to fully ensure sealing
-
- Measuring Range (mPa·s) :40～141 KU/32～1,099gm/27～5,274cP
- Rotating Speed (RPM): 200
- Number of spindle: Special spindle
- Accuracy: ±1% full scale range in use
- Repeatability: ±0.5% full scale range in use
-
- Apply to plastic and glass pipettes from 0.1 -100mL
- 3μm replaceable hydrophobic filter
-
- Apply in ink printing, in Film Processing, Textile Printing and Dyeing, Plastic Electronics and Other Industries
- Wavelength Range: 400~700nm
- Wavelength Pitch: 10nm
- Combined LED Light Sources
-
- PVC tubing with outside diameter 3-7mm, thickness not more than 0.85mm
- Automatic control of sealing time
- No need of scissors to cut the tubing
-
- Digital control, up to 300℃
- Bead Capacity: 300g
- Heating Time: 25min(RT. to 300°C)
- Temp accuracy: 土5℃
-
- Heating steps: 9 steps
- Temperature range (nominal Temperature): 20℃~3000℃
- Slope heating time: 0~999s
- Heating holding time: 1s~999s (the sum of both time should be less than 999 seconds)
- Inert gas needed: argon, pressure of entry larger than 0.3Mpa
- Cooling water: tap water or cycling water, flow rate no less than 2L/min
-
- Analysis Time: 5mins/sample
- Detection Limit: 0.005ng(DMA-5), 0.001ng(DMA-5P)
- Repeatability: RSD＜1.0%@1ng
- Autosampler Capacity: 100 positions (10*10)
- Sample Injection Volume: 1500mg (solid), 1500μL(liquid）
-
- Resolution: 0.001,0.01,0.1,1
- Accuracy: ±1% F.S
- Calibration Points: 2 to 5 points (0.01, 0.1, 1, 10, 100mmol/L)
-
- 2 to 5 points calibration
- For water hardness and temperature
- Stores or recalls up to 500 data sets
- 5 kinds of water hardness units
-
- lon Range: 0.001-30000
- Accuracy: ±0.5% F.S. (monovalent), ±1% F.S. (divalent)
- mV Range: ±2000.0mV
-
- 1 to 3 points calibration,
- Selectable TDS conversion factor
- Setup menu contains 5 options
- Accuracy: 1% F.S.
-
- Accuracy: ±1% F.S.
- Calibration Points: 1 point
- Suitable for measuring the low concentration liquids
-
- Accuracy ±1% F.S.
- Calibration Point 1 point
- Suitable for general application
Get Social