Autopsy Table, AT-4A

Description

Its countertop is formed by three-dimensional technology, with large arc-shaped rounded borders on the four sides of the table top, large-diameter downpipes, and is not easy to block the sewer.

Features
The inner side of countertop frame is inclined (the mold is stamped and formed, and the shape is beautiful)
The countertop is formed by three-dimensional technology, and the four sides of the countertop are large arc-shaped rounded borders.
Large-diameter downpipe, not easy to block the sewer.
Exhaust system: It is equipped with an exhaust duct and is led out through an underground duct to the outside.
Novel design:The inner side of the autopsy table is inclined 30°, and the air outlets on both sides are directed downwards in the way of negative pressure ventilation. The ventilation under the autopsy table is evenly dispersed in a laminar flow state, forming a stable and tight air barrier above the autopsy table.
Arc-shaped connection inside the table, not easy to scale, easy to clean and disinfect.
There is a hair separator in the pool to prevent hair from entering the drain pipe and clogging it.
Equipped with hot and cold regulator, induction manual faucet (to be connected to the water heater).
The water pressure of the mobile spray washing gun can be adjusted to wash the overall dirt on the dissection table.
The pulverizer under the pool can pulverize the dissected tissue and discharge it through the drain.

Specifications