- Temperature Control Range: RT+5℃~150℃
- Heating Up Rate: ≤ 10min (20℃ ~100℃ ); ≤ 30min (20℃~150℃ )
Bioevopeak dry thermostat/digital dry bath incubator / dry block heater are offered with a variety of different blocks to fit different sized tubes to suit your specific needs. Dry Bath Incubator, Mini Dry bath incubator, can be chosen.
-
-
- Function: Heating
- Temp. control range: 25℃, 30℃, 37℃, 45℃, 60℃
- Block: 28 wells for 5ml & 10ml mixed tubes
- Timer function and continuous function
- Overheating protection
- Medical dedicated
-
- Temperature Control Range: +5℃~105℃
- Heating Up Rate: ≤ 10min ( 20℃~100℃ )
- Time: 0-99h 59min
-
- Heating Up Rate(20℃~100℃ ): ≤ 15min
- Timer: 0~99h, 0~99m, 0~99s
- Temperature: up to 100℃
-
- Main function: Heating
- Temp range: RT.+5°C~130°C/160°C
- Optional blocks: 3-96 wells for 0.2-2.0ml/6-40mm tubes
- Automatic fault detection and alarm function.
- Built-in over-temperature protection device.
- Temperature deviation calibration function
-
- Temperature Control Mode: Heating membrane,Semi-conductor
- Temperature: 100℃
- Heating Up Rate: ≤ 15min( 20℃~100℃ )
-
- Temperature Control Mode: Heating membrane,Semi-conductor
- Temperature: 100℃
- Heating Up Rate: <15min(25℃ ~100℃ )
- Speed Range: 300~1500rpm, 300~2000 rpm
-
- Main Function: Heating, Cooling
- Temp control range: RT- 30℃/5℃~100℃
- Optional blocks: 6-96 wells for 0.2-50 ml tubes
- Automatic fault detection and buzzer alarm function.
- Built-in over-temperature protection.
- Temperature calibration function.
-
- Orbit:2mm
- Speed Range:200~3000rpm
- Setting Range:0℃~105℃
- Time Range:1sec~99min59sec/1min~99h59min/∞
-
- Temp accuracy：≤±0.3C*@37C
- Display accuracy：0.1C
- Temp setting range: 0C ~100C
- Block quantity：4
-
- Temp control range：RT.-20℃~100℃
- Speed range：200~1500rpm
- Heating time：≤15min(from 25℃ to 100℃)
- Cooling time1：≤10min(from 100℃ to 25℃)
- Cooling time2：≤20min(from RT. to RT.-20℃)
-
- LCD display, simple interface. Easy to set up and use.
- Accurate temperature control, high stability.
- With four groups(A/B/C/D), timing independently or simultaneously.
-
- Real-time display on LCD display
- Overheat protection device
- Built-in temperature calibration function
-
- LED display
- Capacity: 1-5mL, 10 hole areas(Heating or cooling)
- Temperature Setting Range: 10-90℃
- Heating Speed (RT.-90℃): <10min
- Cooling Speed (90℃-RT.): <4min
-
- Timing setting range:1-999 (min/s)
- Temperature control accuracy:±0.2
-
- Function: Heating, Cooling, Mixing
- Temp. control range: RT+0℃/5℃～100℃
- Optional blocks: 4-96 wells for 0.2-50ml tubes
- Three-point temperature calibration
- Programmable
Get Social